Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 247 / 577

245
i-
α
pp
li
You can set an i-
α
ppli program for the Stand-by display. Once set, the
i-
α
ppli Stand-by display automatically appears each time you bring up
the Stand-by display.
1
Software list
1
i
( )
1
Software setting
1
Stand-by set
1
ON or OFF
1
l
( )
“ ” is displayed for the software program set as the Stand-by display.
“ ” or “ ” is displayed while an i-
α
ppli Stand-by display is running.
From the i-
α
ppli Stand-by display, press
r
.
“ ” or “ ” changes to a blinking “ ” or “ ” and then you can operate the i-
α
ppli
program as a normal one.
≥
To return to the i-
α
ppli Stand-by display, press and hold
r
for at least one second
or press
h
; then select “Ended”. To release the i-
α
ppli Stand-by display, select
“Terminated”, and select “YES”.
<i-
α
ppli Stand-by Display>
Operating i-
α
ppli Stand-by Display
Software Setting (Stand-by Set)
To operate an i-
α
ppli program as a normal i-
α
ppli program
when an i-
α
ppli Stand-by display is running
Information
≥
If you turn off the FOMA phone while the i-
α
ppli Stand-by display is running, the
confirmation display appears asking whether to start the i-
α
ppli program when you
turn on the power again.
≥
You can set only one software program for the i-
α
ppli Stand-by display.
≥
Some i-
α
ppli programs cannot be set for the Stand-by display.
≥
With some software programs set as the i-
α
ppli Stand-by display, you can press a key
to go from the normal i-
α
ppli status to the i-
α
ppli Stand-by display status. However,
you cannot return to the i-
α
ppli Stand-by display if another menu function is running.
≥
Note that you might not be able to receive timely information if you have set “Software
setting (Stand-by net)” to “OFF”.
≥
You cannot use the Web To function and the Phone To/AV Phone To function from
the i-
α
ppli Stand-by display.
≥
If the software program which connects to the network is set for the i-
α
ppli Stand-by
display, it might not operate successfully because of radio wave conditions or other
factors.
You can set whether to permit communication for when the i-
α
ppli
Stand-by display is running.
1
Software list
1 i
( )
1
Software setting
1
Stand-by net
1
ON or OFF
1 l
( )
You can temporarily end the running i-
α
ppli Stand-by display. Also, you
can release the i-
α
ppli Stand-by display.
1
m
1
Settings
1
Display
1
Display setting
1
Stand-by display
1
End
i α
ppli display
1
End or Terminate
≥
When you select “Terminate”, select “YES”.
≥
When you bring up the Stand-by display while a menu function is operating, the image
set for “Stand-by display” of “Display setting” will be displayed, even when the i-
α
ppli
Stand-by display is set.
≥
When communicating frequency is extremely high in a certain period of time while an
i-
α
ppli program is running as the i-
α
ppli Stand-by display, the confirmation display
appears. When you press
- r
, the confirmation display appears asking whether to
continue communication.
≥
If you set Lock All or Personal Data Lock when the i-
α
ppli Stand-by display is shown,
the i-
α
ppli Stand-by display will end. If you set Lock All, the image set for “Stand-by
display” of “Display setting” will be displayed and if you set Personal Data Lock, the
default Stand-by display will be displayed. The i-
α
ppli Stand-by display will return
when you release each lock.
Software Setting (Stand-by Net)
Information
End Stand-by Display