Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 127 / 577

125
Secu
rity Se
tti
n
g
s
You can set whether to receive (accept) or not to receive (reject) a voice
call and videophone call depending on the reason for no caller ID. There
are three reasons; “Unavailable”, “PublicPhone”, and “User unset”.
1
m
1
Settings
1
Lock/Security
1
Call setting w/o ID
1
Enter your Terminal Security Code
1
Select an item.
Unavailable . . . . . Calls from the other party who cannot notify his/her phone
number such as calls from overseas or from landline phones via
call forwarding services.
(However, the caller ID might be notified depending on the
telephone companies the calls go through.)
PublicPhone . . . . Calls from public phones, etc.
User unset . . . . . When the caller has set the caller ID not to be notified.
2
Accept or Reject
≥
If you select “Accept”, go to step 2 on page 92 to select a ring tone.
If you select “Same as ring tone”, the ring tone will be the one selected in “Phone”
of “Select ring tone”.
+ m - 1 - 0
<Call Setting without ID>
Setting Response to Incoming Calls
without Caller ID
Information
≥
If you select “Reject”, the ring tone does not sound even if a call comes in, the call is
stored in “Received calls” as a missed call record and the “Missed call” icon appears
on the Stand-by display. Also, the caller hears a busy tone even if you have set Voice
Mail Service or Call Forwarding Service to “Activate”. However, if you set the ring time
for Voice Mail Service or Call Forwarding Service to 0 seconds, when the FOMA
phone is out of the service area, or when the power is turned off, the busy tone will not
be played back, activating Voice Mail Service or Call Forwarding Service.
≥
You can receive SMS messages or i-mode mail messages regardless of this setting.
1
m 1
Settings
1
Incoming call
1
Ring time
1
Do the following operations.
+ m - 9 - 0
<Ring Time>
Delaying Start of Ringing Operation
Item Operation/Explanation
Ring start time You can set the FOMA phone not to start ringing operation
immediately for when a voice call or videophone call comes in
from the party whose phone number is not stored in the
Phonebook. This function is effective as a countermeasure for
blocking nuisance calls such as one ring phone scam (one-giri).
1
ON or OFF
1
Enter a start time (seconds).
≥
Enter from “01” through “99” in two digits.
Missed calls display You can set whether to display the call disconnected within the
time specified for “Ring start time” in Received Calls.
1
Display or Not display
Information
≥
When a call comes in from the party whose phone number is stored in the
Phonebook, the FOMA phone starts ringing as soon as the call comes in even if
“186”/“184” is added to the phone number. However, during Personal Data Lock, or
for the call from the party whose phone number is stored as secret data, ringing starts
according to the setting of this function.
≥
If the ring start time is longer than the ring time for Record Message Setting, the
ringing operations do not start, activating Record Message instead. To activate
Record Message after starting the ringing operations, set the longer ring time for
Record Message Setting than the ring start time. The same applies to the ring time for
Voice Mail Service, Call Forwarding Service, and Auto Answer Setting.