Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 378 / 577

376
Co
nve
n
ie
nt
Fu
nct
ion
s
1
During ringing
1
Press the switch of the Flat-plug
Earphone/Microphone with Switch.
A beep sounds and you are connected.
With a videophone call, the substitute image is sent to the other party. You can
switch between the substitute image and the image through your camera by
pressing
m
during the videophone call. (See page 72)
≥
You can use the switch also with the FOMA phone closed.
≥
You can answer calls also by operating the FOMA phone.
≥
When “Auto answer setting” is set to “ON”, a call is answered automatically after
the ring time elapses.
2
After talking, press and hold the switch of the Flat-plug
Earphone/Microphone with Switch for at least one
second to end the call.
A beep sounds twice and you are disconnected.
Receive Calls Using the Switch
Information
≥
Regardless of the setting for “Keypad sound”, a tone for connecting and disconnecting
the line sounds.
≥
Note that you might be connected if you try to connect the Flat-plug Earphone/
Microphone with Switch after the ring tone sounds.
≥
To release hold, press the switch of the Flat-plug Earphone/Microphone with Switch
during answer-hold (On Hold) and while a call is on hold (Holding). (When a
videophone call is put on hold, the image through your camera is sent and the
videophone call starts.)
≥
Do not press or release the switch of the Flat-plug Earphone/Microphone with Switch
in succession. You might be automatically connected.
≥
If you have signed up for Call Waiting Service and “Multi calling” is displayed during a
call, you can switch two calls by pressing and holding the switch of the Flat-plug
Earphone/Microphone with Switch for at least one second. However, you cannot use
the switch to end the call.
≥
You can adjust the earpiece volume by pressing
. <
(raise) or
. >
(lower) during a call.
When “Headset switch to call” is set to “Voice call” and the Stand-by
display is shown, you can press the switch of the Flat-plug Earphone/
Microphone with Switch (option) to make voice calls.
1
m
1
Settings
1
Other settings
1
Headset switch to call
1
Voice call or OFF
≥
You can check the currently set phonebook entry by pressing
l
( ).
2
Search the Phonebook
1
Select a Phonebook entry.
If a call comes in while “Headset mic. setting” is set to “Headset
microphone” and the Flat-plug Earphone/Microphone with Switch
(option) is connected, the FOMA phone automatically answers the call
after the specified ring time elapses.
1
m 1
Settings
1
Incoming call
1
Auto answer setting
1
ON or OFF
1
Enter a ring time (seconds).
≥
Enter from “001” through “120” in three digits.
≥
You cannot set the same ring time for Auto Answer Setting and Record Message
Setting. Set a different time for each.
<Headset Switch to Call>
Selecting a Call Destination for when
Earphone is Connected
Information
≥
You can set a Phonebook entry in the FOMA phone (Phone) only.
≥
When the Phonebook entry contains multiple phone numbers, the first phone number
is set.
≥
If you delete the set Phonebook entry, the Phonebook entry stored in the memory
number 999 is automatically set to Headset Switch to Call.
+ m - 9 - 4
<Auto Answer Setting>
Answering a Call Automatically when
Earphone is Connected