Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 544 / 577

27
22
Uncheck all the items, then click “OK”.
23
Return to the display in step 21, then click
“OK”.
The operation below explains how to make a dial-up
connection using Windows XP as an example. Perform
the operation on page 3 to connect the FOMA phone to
your personal computer.
≥
To perform a connection via packet communication, it is
recommended that you optimize the communication performance by
“Communication Setup Optimization” on page 16. By optimizing
data, you can maximize the high-speed communication capability in
the FOMA network. To execute the optimization, install “FOMA PC
setup software” (see page 7).
≥
When you perform 64K data communication, do not optimize the
communication performance by “Communication setup optimization”.
1
“ スタート (Start)”
1
“ すべてのプログラム (All
programs)”
1
“ アクセサリ (Accessories)”
1
“ 通信 (Communications)”
1
Open “ ネット
ワーク接続 (Network connection)”.
2
Open the access point to be used.
Select the access point icon of the ISP name (see page 22) you
specified in “Set Dial-up Network”, then “
ネットワークタスク
(Network task)” → “ この接続を開始する (Start this connection)”.
Otherwise, double-click the access point icon.
3
Confirm the contents and click “ ダイヤル (Dial)”.
≥
When connecting to “mopera U” or “mopera”, you can leave the
user name and password fields blank.
4
The display appears to indicate the
connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
Making Dial-up Connection
5
The connection is completed.
After the connection is completed, the message below appears from
the indicator of the task bar for a few seconds.
≥
You can start the browser software to browse web pages, use
e-mail and so on.
≥
If this message does not appear, confirm the setting of the access
point again.
1
Click the dial-up icon on
the task tray.
2
Click “ 切断 (Disconnect)”.
Information
≥
Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥
The power consumption of the FOMA phone increases during
communication.
≥
During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
≥
During 64K data communication, “ ” appears on the FOMA phone.
Disconnecting
Information
≥
The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥
The baud rate displayed on your personal computer may be different
from the actual one.