Docomo FOMA P706ie, Инструкция по эксплуатации, Страница: 529 / 577

12
5
Enter an access point name.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名 (Access point name)” field.
≥
You cannot enter the following half-pitch characters:
¥, /, :,
¢
, ?, !, <, >, |, and ”.
≥
In the “ 接続先 ( APN ) の選択 [Select an access point name (APN)]”
field, “mopera.ne.jp (PPP 接続 ) [mopera.ne.jp (PPP connection)]”
is displayed as the default. Go to the “ 接続先 ( APN ) 設定 [Set an
access point name (APN)]” display.
≥
For the setting of “ 発信者番号通知 (caller ID notification)”, follow the
information from the provider and others. For overseas use, select
“
設定しない
(Not set)”.
6
Click “
接続先
(APN)
設定
[Set an access point
name (APN)]”.
“mopera.ne.jp” is registered in “cid1” and “mopera.net” is registered in
“cid3” by default. Click “
追加
(Add)”, then enter the correct access
point name (APN) for FOMA packet communication on the “ 接続先
(APN) の追加 [Add an access point name (APN)]” display. Click “OK”.
The “
パケット通信設定
(Packet communication setting)” display
returns. Select the access point name (APN) you specified newly. If it
is ok, click “OK”.
≥
For a provider access point name (APN) or supported connection
types, contact your provider.
7
Click “
詳細情報の設定
(Set detailed information)”.
The display for specifying “ IPアドレス (IP address)” and “ ネーム
サーバ ー
(name server)” appears. When entering dial-up
information for the provider you have subscribed or Intranet LAN
system, specify addresses according to the entry instruction
information, then click “OK”.
8
Click “
次へ
(Next)”.
9
Specify “ ユーザー名 (User name)” and “ パス
ワ ード (Password)”, then click “ 次へ (Next)”.
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.
≥
Select a user optionally.
10
Put a check mark for “ 最適化を行う
(Optimize)”, then click “ 次へ (Next)”.
The confirmation display appears asking whether to optimize all the
communication settings for the FOMA HIGH-SPEED compatible
terminal, then click “
はい (Yes)”.
≥
If optimized already, the confirmation display to optimize does not
appear.
11
Confirm the set information, then click “ 完了
(Complete)”.
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click “
完了 (Complete)”.
≥
To change the set contents, click “ 戻る (Back)”.
≥
If “
デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
12
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 14)
≥
To make the optimization valid, you need to restart the personal
computer.