Docomo FOMA P704IU, Руководство пользователя

Страница: 58 / 528

56
Function Menu while IDD Prefix Setting/Country Code Setting is Displayed
Switching between a Voice Call and
Videophone Call
You (caller) can switch between a voice call and a videophone call.
This function is available for the mobile phones that can switch between
a voice call and a videophone call.
You cannot switch unless “Notify switchable mode” (
Ÿ
page 80) is set to
“Indication ON” at the other end.
Switch from a Voice Call to Videophone Call
1
During a voice call
▶ ( ) ▶
Change
While switching, the voice guidance is played back.
Display for a
voice call
Display for a
videophone call
Switch from a Videophone Call to Voice Call
1
During a videophone call
▶ ( )
▶
CHG to voice call
▶
YES
While switching, the voice guidance is played back.
Display for a
videophone call
Display for a
voice call
Information
You can switch between a voice call and a videophone call repeatedly.
When i-mode or packet communication is in progress, the communication is
disconnected and then the voice call is switched to the videophone call. With
packet communication, the confirmation display appears asking whether to
disconnect the communication.
When packet communication is in progress at the other end, the message
to the effect that the communication cannot be switched is displayed and the
voice call continues without switching to the videophone call.
You cannot switch from the voice call to the videophone call while “Multi calling”
is displayed during the call if you have signed up for Call Waiting Service.
It takes about five seconds to switch. Switching may take a longer time
depending on the radio wave conditions.
Depending on how the caller’s phone is working or on the radio wave
conditions, switching between a voice call and videophone call may fail and
the connection may be cut off.
If you switch between the voice call and videophone call during a call, the
call duration and call cost are counted respectively for the calls. You are not
charged while “Changing” is displayed.
When you switch a videophone call to voice call, Hands-free is deactivated.
Function menu Operation/Explanation
Edit For IDD Prefix Setting
Ÿ
step 2 of “IDD Prefix Setting” on page 55
For Country Code Setting
Ÿ
step 2 of “Country Code
Setting” on page 55
You can edit the item also by ( )
.
Delete this
▶
YES You cannot delete the
international call access
code or country code set
by “Auto assist setting”.
Delete all
▶
Enter your Terminal
Security Code
▶
YES
Switching between a V
oice Call and V
ideophone Call
Ż
V
oice/V
ideophone Calls
“Changing”
display
“Changing”
display