Docomo FOMA P704IU, Руководство пользователя

Страница: 518 / 528

49
AT command Outline Parameter/Explanation
Command execution
example
AT
½
DGPIR=n
[M]
This command is valid at
dialing/ receiving calls.
In the dial-up network
setting, you can add “186”
(notify) or “184” (not notify)
to the phone number of the
access point.
(See page 21 or page 42) n=0: Uses the APN as it is. (default)
n=1: Adds “184” to the APN. (always not notify)
n=2: Adds “186” to the APN. (always notify)
AT
½
DGPIR?: Displays the current setting.
AT
½
DGPIR=0
OK
AT
½
DGPIR?
½
DGPIR:0
OK
AT
½
DRPW
[AT][M]
Displays the output power
index for receiving.
(0: minimum value to 75:
maximum value)
−
AT
½
DRPW
½
DRPW:0
OK
+++
[M]
Changes to the online
command state without
disconnecting the line when
the escape sequence is
executed in the online mode.
− −
AT+CEER
[M]
Displays the reason why
the preceding call was
disconnected. <report>
Disconnection reason list (See page 54) AT+CEER
+CEER:36
OK
AT+CGDCONT
[M] Sets the access point name
(APN) for when dialing for
packet communication. See page 53. See page 53.
AT+CGEQMIN
[M]
Registers the reference
value to judge whether the
system permits QoS (Quality
of service) reported from the
network at establishment of
PPP packet communication. AT+CGEQMIN=[parameter]
See page 53.
AT+CGEQMIN=?
Lists the settable values.
AT+CGEQMIN?
Displays the current setting. See page 53.
AT+CGEQREQ
[M]
Sets QoS (Quality of
service) to be requested
to the network at dialing of
PPP packet communication. AT+CGEQREQ=[parameter]
See page 53.
AT+CGEQREQ=?
Lists the settable values.
AT+CGEQREQ?
Displays the current setting. See page 53.
AT+CGMR
[M]
Displays the version of the
FOMA phone.
−
AT+CGMR
1234512345123456
OK
AT+CGREG=n
[M]
[&F][&W]
Sets whether the network
registration state is noti
fi
ed.
Displays whether you are
inside or outside the service
area according to the
returned noti
fi
cation.
n=0: Not noti
fi
ed. (default)
n=1: Noti
fi
ed at switching between the inside
and outside of the service area.
(Inquiry)
AT+CGREG?
+CGREG: <n>,<stat>
n: Set value
stat:
0: Outside packet area
1: Inside packet area
4: Unknown
5: Inside packet area (during roaming)
AT+CGREG=1
OK
(set to “Noti
fi
ed”)
AT+CGREG?
+CGREG:1,0
OK
(means the outside of the
service area)
(when moved from the outside to
the inside of the service area)
+CGREG:1
AT+CGSN
[M]
Displays the serial number
of the FOMA phone.
−
AT+CGSN
123456789012345
OK
AT+CLIP=n
[AT][M]
[&F][&W]
Enables to display the
other party’s caller ID on
the personal computer
at reception of 64K data
communication or
videophone calls. n=0: Does not notify. (default)
n=1: Noti
fi
es.
Result: +CLIP:<n>,<m>
m=0: NW setting not to notify caller ID at calling
m=1: NW setting to notify caller ID at calling
m=2: Unknown
AT+CLIP=0
OK
AT+CLIP?
+CLIP:0,1
OK
0GZV2CIG 0GZV2CIG