Docomo FOMA P704IU, Руководство пользователя

Страница: 304 / 528

302
Using microSD Memory Card with Personal Computer
By connecting the microSD memory card to the microSD memory
card adapter, you can use the microSD memory card on a personal
computer which supports SD memory card. The microSD memory
card adapter is available at mass retailers for home electric
appliances etc.
For installing the microSD memory card adapter, refer to the
instruction manual for the microSD memory card adapter.
Connector Cable: FOMA USB Cable (option)
Personal Computer: Personal computer having the USB port (Universal
Serial Bus Specification Rev 1.1 compliant) that can
be connected with the FOMA USB Cable (option)
Compatible Operating Systems: Windows
®
2000, Windows
®
XP,
Windows Vista™ (Japanese version in each)
Setting at purchase Communication mode
With a microSD memory card inserted, connect the FOMA phone to
a personal computer; then you can read the data from or write the
data onto the microSD memory card.
The following equipment is required:
Use FOMA Phone as microSD Reader/Writer
1
▶ ▶
Other settings
▶
USB mode setting
▶
microSD mode
If you set to “microSD mode”, “ ” is displayed on the Stand-by display.
To use the FOMA phone for packet communication, 64K data
communication, data sending/receiving (OBEX), and for calls with USB
Hands-free compatible device, set mode to “Communication mode”.
2
Connect the FOMA phone to a personal computer
using the FOMA USB Cable (option).
The personal computer recognizes the microSD memory card.
“ ” appears on the Stand-by display. Also, “ ” is displayed
while the microSD memory card is inserted.
Information
If you format the microSD memory card using a personal computer or
other devices, the card might not be used on the FOMA phone. Make
sure that you format the microSD memory card using the FOMA phone.
If the FOMA phone and personal computer are not correctly
connected, or the remaining battery level of the FOMA phone shows
very low or goes flat, you cannot send or receive data. In addition, you
may lose data.
While data is being read or written, do not pull the FOMA USB Cable
off. Not only you cannot send or receive data, but also you may lose
the data.
While data is being read or written, you cannot set this function.
Further, make sure that you do not “Reset settings” or “Initialize”
during reading/writing. Malfunction of the microSD memory card could
result.
You cannot read from/write to a personal computer while reading
from/writing to the FOMA phone, and vice versa.
To use the DoCoMo keitai datalink, use it in “Communication mode”.
If you remove the battery pack with the power of the FOMA phone
turned on, “USB mode setting” is set to “Communication mode”.
Using microSD Memory Card with Personal Computer
Ż
Data Display/Edit/Management