Docomo FOMA P704IU, Руководство пользователя

Страница: 434 / 528

432
Protecting FOMA Phone from Data
Causing Failure
First of all, update the pattern data to make it the latest.
<Scanning Function>
Regarding data and programs downloaded or obtained from
sites, i-mode mail messages or SMS messages to the FOMA
phone, you can detect data that might cause failure, can delete
it, and can stop starting an application program.
Use the pattern data for checking. Update the pattern data, because it is
updated each time new trouble is found.
Ÿ
page 432
The scan function is for filtering out the data that causes failure to mobile
phones at the time of browsing web pages or receiving mail messages.
Note that this function works only when the pattern data for each failure
has been downloaded to your mobile phone and when the pattern data
for each failure is found.
The data contained in the pattern data varies depending on the mobile
phone model. Therefore, note that we may stop distributing the pattern
data to mobile phones that have been on the market for three years or
more.
Set Scanning Function <Set Scan>
Setting at purchase ON
If you set “Set scan” to “ON”, data or a program is automatically
checked when you try to run it.
1
▶
▶
Lock/Security
▶
Scanning function
▶
Set scan
2
ON or OFF
▶
YES
When the scan function is set, an alert is shown by five levels if
data that might cause failure is detected.
Ÿ
page 433
Information
The scanning is not available for the SMS message which notifies you
of receiving mopera mail or of incoming calls for Voice Mail Service.
Update Pattern Data <Update>
You can update the pattern data.
1
▶
▶
Lock/Security
▶
Scanning function
▶
Update
▶
YES
▶
YES
To cancel during i-mode connection, select “Cancel”.
2
OK
When pattern data update is not necessary,
“Pattern definitions are up-to-date” is
displayed. Use the pattern data as it is.
Information
When updating the pattern data, the proper information about your
mobile phone (model name, serial number, etc.) is automatically sent
to the server (DoCoMo-managed server for the scanning function). We
at DoCoMo never use the sent information for other purposes than for
the scanning function.
Set the date (year/month/date) correctly in advance.
The pattern data is not updated in the following cases:
・
When the date/time is not set
・
During a call
・
Out of the service area
・
When the UIM is not inserted
・
During Lock All
・
While another function is working
・
When connecting to external devices such as personal computers
・
While Self Mode is activated
・
During PIM Lock
If you cancel downloading midway, the data downloaded up to that
point is deleted.
Scanning Function
Ż
Appendix/External Devices/T
roubleshooting