Docomo FOMA P704IU, Руководство пользователя

Страница: 106 / 528

104
You can set the vibrator to notify you of incoming calls and mail.
Informing You of an Incoming Call by Vibration
<Vibrator>
Setting at purchase OFF
1
▶ ▶
Incoming call
▶
Vibrator
▶
Select an incoming type
▶
Select a vibration pattern.
Pattern 1 ............ Alternates between vibration on (about 0.5
seconds) and off (about 0.5 seconds).
Pattern 2 ............ Alternates between vibration on (about 1 second)
and off (about 1 second).
Pattern 3 ............ Alternates between vibration on (about 3 seconds)
and off (about 1 second).
Melody linkage .... Vibrates in time with the vibration pattern stored in
the melody.
OFF .................... Does not vibrate.
While you are selecting a pattern, the FOMA phone vibrates by the
selected pattern for confirmation.
However, it does not vibrate if you select “Melody linkage”.
The following icons are displayed while the vibrator is set:
：
Vibrates for incoming voice calls or videophone calls.
：
Vibrates for incoming mail, chat mail or Messages R/F.
：
Vibrates for incoming voice calls or videophone calls, and
vibrates for incoming mail, chat mail or Messages R/F.
Information
The priority order of vibrators is as follows: “Setting by phone number
or mail address”
ĺ
“Setting by group”
ĺ
“Vibrator”.
The vibrator vibrates at a regular strength, regardless of the ring volume level.
Even when “Melody linkage” is set, the FOMA phone vibrates with
“Pattern 2” if an i-motion movie or melody with no vibration pattern is
set for the ring tone.
Be careful not to leave the FOMA phone on a desk or similar places
with the vibrator activated; when a call comes in, the FOMA phone
might move and fall by vibration.
Set by Group
You can set a ring tone for each group of the FOMA phone’s
Phonebook.
If you have set the ring tone by phone number or mail address,
that setting has priority.
You cannot set the ring tone for “Group 00” or for groups on the UIM.
1
Stand-by display
▶ ▶
Group setting
▶
Highlight a group and press ( )
▶
Utilities
▶
Ring tone or Mail ring tone
Ÿ
step 3 on page 103
The set item is indicated by “
★
”.
To release the ring tone for the group, perform the same operation.
Information
You can set this function for either the group in which secret and
ordinary Phonebook entries are stored together or the group in which
only secret entries are stored; however this function is disabled if you
receive a call or mail from the secret entry. In this case, the ring tone
sounds according to the setting of “Select ring tone”.
V
ibrator
Ż
Sound/Screen/Light Settings