Docomo FOMA P704IU, Руководство пользователя

Страница: 341 / 528

339
Calls reset
Displays the date and time when Reset Total Duration was
executed last time.
Cost reset
Displays the date and time when Reset Total Cost was executed
last time.
After checking, press
.
Information
When Last Call Duration exceeds “19 hours 59 minutes 59 seconds”,
or Total Calls Duration exceeds “199 hours 59 minutes 59 seconds”,
“0 s” returns to re-count the time.
If you switch between the voice call and videophone call during a call,
the call duration and call cost are counted respectively for the calls.
You are not charged while “Changing” (
Ÿ
page 56) is displayed.
The duration/charge for i-mode communication and packet communication are
not counted. For how to check the i-mode fee, refer to “Mobile Phone User’s
Guide [i-mode]” which is supplied on your i-mode contract.
The charge for Chaku-moji is not counted.
The international call fee for using WORLD CALL is counted. The fees
for using other international call services are not counted.
The duration for ringing and calling is not counted as call duration.
If you turn off the power or remove the UIM, Last Call Duration is reset
to “0 s”; and Last Call Cost is reset to “¥
＊＊
”.
Resetting Total Duration/Total Cost
<Reset Total Cost&Duration>
1
▶ ▶
Call time/cost
▶
Reset total cost&dura.
▶
Enter your Terminal Security Code
▶
Do the following operations.
Item Operation/Explanation
Reset total
duration You can reset Last Call Duration and Total Calls Duration to “0 s”.
▶
YES
Reset total
cost You can reset Last Call Cost and Total Calls to “¥0”.
▶
YES
▶
Enter the PIN2 code.
PIN2 code
Ÿ
page 126
Setting at purchase
Notice call cost: OFF, Max cost: ¥0 (when “Notice call cost” is set to “ON”),
Method to alert: Icon (when “Notice call cost” is set to “ON”),
Auto reset setting: OFF (when “Notice call cost” is set to “ON”)
You can set the call cost limit for Total Calls and can be notified
when it is exceeded. If you set “Auto reset setting” to “ON”, the call
cost is reset at midnight on the 1st of the month and “ ” is deleted.
Setting Call Cost Limit
<Notice Call Cost>
1
▶ ▶
Call time/cost
▶
Notice call cost
▶
Enter your Terminal Security Code
▶
ON or OFF
2
Enter a max cost.
You can set from ¥10 through ¥100,000 in unit of ¥10.
3
Select a method to alert
▶
ON or OFF
▶
Enter the PIN2 code.
PIN2 code
Ÿ
page 126
When Total Calls has exceeded the max cost
“ ” appears. When “Icon + alarm” is set as a notice method and the
Stand-by display returns, the message to the effect that the call cost has
exceeded the maximum cost is displayed, and a warning tone sounds
from the speaker.
You can clear “ ” displayed by Notice Call Cost.
Clear Max Cost Icon
1
▶ ▶
Call time/cost
▶
CLR max cost
icon
▶
Enter your Terminal Security Code.
Information
“ ” is cleared also by executing Reset Total Cost, Reset Settings, or Initialize.
To be re-notified of the set limit after the maximum cost is exceeded, reset
Total Calls.
Other Convenient Functions
Ź
Reset T
otal Cost&Duration
If you select “OFF”, the setting is completed.