Docomo FOMA P704IU, Руководство пользователя

Страница: 487 / 528

18
Reading access point name (APN) information
from the FOMA phone
From the menu, select “
ファイル
(File)”
ĺ
“FOMA
端末から
設定を取得
(Obtain the setting from the FOMA phone)”; you
can obtain the access point name (APN) setting from the
FOMA phone.
Writing access point name (APN) information
to the FOMA phone
Click “FOMA
端末へ設定を書き込む
(Write the setting to the
FOMA phone)”; you can write the displayed access point
name (APN) setting to the FOMA phone.
You cannot write the IP information to the FOMA phone
which does not support the IP connection.
Dial-up information creation function
Select an access point name (APN) you add or edit on the
access point name (APN) setting display, then click “
ダイヤ
ルアップ作成
(Create dial-up information)”; you can create
dial-up information for packet communication. If the access
point name (APN) setting is not written to the FOMA phone,
the FOMA phone setting writing confirmation display then
appears, then click “
はい
(Yes)”. After writing ends, the “
パ
ケット通信ダイヤルアップ作成画面
(packet communication
dial-up information creation display)” appears.
Enter any access point name, then click “
アカウント・パス
ワードの設定
(Specify account and password)”. (You can
leave it blank to connect to “mopera U” or “mopera.”)
Enter the user name and password, select the authorized
user, and then click “OK”.
If your Internet service provider instructs you to specify IP
and DNS information, click “
詳細情報の設定
(Set detailed
information)”, and register the required information. Then
click “OK”.
After entering information, click “OK”. Dial-up is created.
See page 10 for using “mopera U” or “mopera”.
See page 11 for using a provider other than “mopera U” or
“mopera”.
Confirm the COM port number (See page 19)
Start the communication software that enables
the entry of AT commands (See step 3 on page 20)
Set an access point name (APN)
(See step 7 on page 21)
Set “caller ID notified/not notified”
(See step 2 on page 21)
Set others (See page 47)
Exit the communication software
(See step 9 on page 21)
■
AT commands
Ɣ
The AT commands are used to control a modem. The FOMA
phone, which conforms to the AT commands, supports some
extended commands and unique AT commands.
Ɣ
By entering AT commands, you can carry out detailed setting
for packet communication and FOMA phone, and confirm
(display) the setting contents.
Ɣ
If the entered AT command is not displayed, enter “ATE1 ”.
Ɣ
The access point name (APN) is information to be registered in
the FOMA phone, so if you connect another FOMA phone, you
need to register the access point name (APN) again.
Ɣ
To continue using the access point name (APN) of the personal
computer, register the same access point name (APN) for the
same cid number in the FOMA phone.
Information
Set Packet Communication
The operation below explains how to set a
connection for packet communication without
using the “FOMA PC setup software”.
The packet communication uses AT commands to
carry out the settings from a personal computer.
To specify settings, communication software to
enter AT command is required. “Hyper Terminal”,
which is attached to Windows
®
as the standard
software, is used here for explanation.
When using DoCoMo Internet access service
“mopera U” or “mopera”, you do not need to set
an access point name (APN) (see page 20).
You can set “caller ID notified/not notified” (see
page 21) as required. (You need to set “caller ID
notified” when using “mopera U” or “mopera”.)
Setting Dial-up Network
<Packet communication setting flow using AT commands>