Docomo FOMA P704IU, Руководство пользователя

Страница: 54 / 528

52
Information
You can make a voice call also by pressing and then entering the
party’s phone number. If you enter a wrong number, press to clear
the display and then redial.
When you make a videophone call with substitute image, note that you
will still be charged for the digital communication, not the voice calls.
If you dial 110, 119 or 118 using the videophone function, the number
will be automatically dialed out as a voice call.
You can send a Chara-den image to other party instead of your own
image during a videophone call.
Ÿ
page 76
The International videophone call is available using the DoCoMo
international call service “WORLD CALL”.
Ÿ
page 54
Display during dialing
The other party’s name and icon will be displayed if you have stored the
party’s phone number and name in the Phonebook. However, the image
will not be displayed, even if you have stored it for that party.
The phone number instead of the name will be displayed if the
Phonebook entry has been stored as secret data, or if PIM Lock is
activated.
If you enter a wrong phone number
Each time you press , the digit on the far right is cleared. If you
press and hold for at least one second, all the digits are cleared
and the Stand-by display returns.
Press to move the cursor to the digit you want to clear, and then
press to clear it. To clear all the digits on and to the right of the
cursor, press and hold for at least one second.
Photo-sending during a call
During a voice call, you can send the other party the still images you
have taken on the spot or ones you have saved.
Ÿ
page 209
When a videophone call cannot be connected
When a videophone call cannot be connected, the reason is displayed.
(The displayed reason might not be the same as the actual reason
depending on the other party’s phone and contract for network services.)
Messages Reasons
Check number, then
redial You have dialed a non-existent phone
number.
Busy The other party is busy. (Depending on the
other party’s phone, this message might be
displayed during packet communication as
well.)
Busy with packet
transmission The packet communication is in progress at
the other end.
Out of service area/
power off The other party’s phone is out of the service
area or turned off.
Set caller ID to ON Your caller ID is not notified (when dialing
“V-live” or “Visualnet”).
Your call is being
forwarded During forwarding
Redial using voice call The other party activates Call Forwarding
Service but the forwarding destination phone
does not support videophone calls.
Connection failed Redial after setting “Activate” of “Caller ID
notification” to “ON”.
・
This may appear in the case other than
above.
Making a Call/V
ideophone Call
Ż
V
oice/V
ideophone Calls