DoAll TF-2025M, Инструкция по эксплуатации

Страница: 23 / 34

19
TYPICAL OPERATING PROCEDURES
(Continued....)
Operatng Notes
1. To interrupt a cut in either manual or automatic
cycle: (a) Move the Saw Head Control selector
to "HOLD" (this will stop saw head movement); to
resume cut after interuption, move the Saw Head
Control selector to "FWD/AUTO" and then push
the Head Rapd Approach pushbutton.
2. When pushing the Head Rapd Approach
pushbutton, the saw head will move forward at a
rapid speed until it reaches the "feed zone". The
Feed Force then engages as the cut begins.
DO NOT remove any cut-off peces untl they
are away from the saw band or the saw band
has stopped completely.
For future reference, keep a record of band
speed, feed rate, feed force and coolant
applcaton settngs for successful jobs.