background image

DAMAGE CLAIM PROCEDURES

VISIBLE DAMAGE AT THE TIME OF DELIVERY:

1. 

Note damage on carrier’s delivery receipt.  Accept the shipment.  It can be returned later if repairs 

are not possible in the field.

2. 

Request a “damage inspection” from the delivery carrier:

 

a. 

The carrier will send his own people or contract an independent agency to make the  

 

 

inspection.

 

b. 

The inspector will request a signature on the report and leave a copy.

 

c. 

The carrier “damage inspection” report is not final.  If additional damage is found when    

 

repairs are started, contact the carrier for another inspection; or at least give them the    

 

details of the damage.

3. 

Do not move the equipment from the receiving area and keep all shipping materials until carrier 

“damage inspection” report is complete.

4. 

If possible, take photographs of the damage and keep them for your files.  Photos could possibly 

prove a claim at a later time.

5. 

Keep a record of all expenses and be sure they are documented.

6. 

Repair damage in the field whenever possible.  Carriers encourage this to keep expenses down.

7. 

You have nine (9) months to file a claim.

1. 

You have fourteen (14) days to report damage not noted at time of delivery.

 

a. 

Report damage as soon as possible.  This makes it easier to prove that it did not happen   

 

at cosignee’s plant.

 

b. 

Inspect machine(s) carefully before moving from the receiving area.  Again, if machine is   

 

not moved, it is easier to prove your case.

2. 

Request a “damage inspection” from the delivery carrier:

 

a. 

The carrier will send his own people or contract an independent agency to make the 

 

 

inspection.

 

b. 

The inspector will request a signature on the report and leave a copy.

 

c. 

The carrier “damage inspection” report is not final.  If additional damage is found when    

 

repairs are started, contact the carrier for another inspection; or at least give them the    

 

details of the damage.

3. 

Do not move the equipment from the receiving area and keep all shipping materials until carrier 

“damage inspection” report is complete.

4. 

If possible, take photographs of the damage and keep them for your files.  Photos could possibly 

prove a claim at a later time.

5. 

Keep a record of all expenses and be sure they are documented.

6. 

Repair damage in the field whenever possible.  Carriers encourage this to keep expenses down.

7. 

You have nine (9) months to file a claim.

CONCEALED DAMAGE:

Содержание TF-2025M



































Отзывы: