DoAll TF-2025M, Инструкция по эксплуатации

Страница: 14 / 34

10
OPERATION
SAFETY PRECAUTIONS
Warning Label - READ and UNDERSTAND.
USING THE JOB SELECTOR
1. Refer to the Job Selector chart on the front panel
of the control console for information about the
recommended blade pitch, band speed, and cutting
rate. This information is listed according to type
of material to be cut and its thickness. The Job
Selector also has a checklist for proper machine
operation and saw band break-in procedures.
Job Selector recommendatons can be adjusted
to meet specal sawng requrements and are
a general gude for correct cut-off sawng on
a properly-mantaned DoALL saw. They are
based on cuttng annealed, scale-free stock
usng a Imperal B-Metal saw blade.
Job Selector.