dixell ichill IC260L, Руководство пользователя

Страница: 40 / 105

1592015300 User manual iCHILL 200 L GB r1.3 09/09/2005
dF 11 Temperature setpoint for combined defrost end of the 1
st
circuit. -30.0
-22
70.0
158
°C
°F
Dec
int
dF 12 Temperature setpoint for combined defrost of the 2
nd
circuit after parameter
DF10 counting.
-30.0
-22
70.0
158
°C
°F
Dec
int
dF 13 Temperature setpoint for combined defrost end of the 2
nd
circuit. -30.0
-22
70.0
158
°C
°F
Dec
int
dF 14 Activation of all the steps of the 1
st
circuit during the defrost.
0= Not enabled
1= Enabled 0 1
dF 15 Activation of all the steps of the 2
nd
circuit during the defrost.
0= Not enabled
1= Enabled 0 1
dF 16 Time delay between two compressor ON in defrost mode 0 250 Sec
dF 17 Fan control during defrost / dripping time
0= Not enabled
1= Only in defrost
2= For both functions defrost / dripping time
0 2
dF 18 Pressure / temperature setpoint to force the ventilation ON during the defrost. -30.0
-22
0.0
0
70.0
158
50.0
725
°C
°F
bar
psi
Dec
int
Dec
Int
Forced defrost
dF 19 Minimum time delay before a forced defrost 0 250 sec
dF 20 Pressure / temperature setpoint for a forced defrost -30.0
-22
0.0
0
70.0
158
50.0
725
°C
°F
bar
psi
Dec
int
Dec
int
dF 21 Forced defrost differential 0.1
0
0.0
0
25.0
45
14.0
203
°C
°F
Bar
Psi
Dec
int
Dec
int
Defrost operative mode
dF 22 Defrost start-up with 2 circuits
0= Independent
1= If both have reached the necessary requirements
2= If one has reached the necessary requirements
0 2
dF 23 End defrost for two circuits and common ventilation.
0= Independent
1= If both have reached the necessary end defrost requirements
2= If one has reached the necessary end defrost requirements
0 2
Start / stop defrost from analog input
Parameters description min max udm resolution
dF 24 Start / stop defrost probe
0= start and stop with condenser temperatur / pressure probe
1= start with evaporator pressure probe / stop with condenser temperatur /
pressure probe
2= start with condenser temperatur / pressure probe / stop with evaporator
pressure probe
3= start and stop with evaporator pressure probe
0 3
Pr1 Password 0 999
Pr2 Password 0 999
Pr3 Password 0 999
Recovery
Parameters description min max udm resolution
rC 1 Recovery modes
0 = not enabled
1 = 2 indipendent circuit
2 = both the circuit in parallel
0 2
rC 2 Delay time delay with step forced off 0 250 Sec
rC 3 Delay time delay with step forced off after the recovery valve activation 0 250 Sec
rC 4 Recovery minimum time 0 250 Min
rC 5 Minimum interval time between the end and the beginning of the next
recovery
0 250 Min
rC 6 Temperature setpoint to disable the recovery -30.0
-22
0.0
0
70.0
158
50.0
725
°C
°F
Bar
Psi
Dec
int
Dec
int
rC 7 Temperature differential to restore the recovery 0.1
0
0.0
0
25.0
45
14.0
203
°C
°F
Bar
Psi
Dec
int
Dec
int
rC 8 Maximum time with recovery disabled (if temperature/pressure within rC6-
rC7)
0 250 Min
Pr1 Password 0 999