dixell ichill IC260L, Руководство пользователя

Страница: 15 / 105

1592015300 User manual iCHILL 200 L GB r1.3 09/09/2005
Pg.
14/105
4.4 KEY FUNCTION
KEY ACTION FUNCTION
Push and release Show chiller set point SetC and heat pump SetH
Push once
In chiller or heat pump if the Energy saving or the Dynamic
setpoint are enabled it shows the real setpoint
Setr, the led is
blinking.
Push for 3 seconds the release Change between chiller / heat pump
During the programming: push one time Select a parameter or confirm a value
Push once with probe label showed on the
bottom display Change between the read-out of the circuit 1 and the circuit 2 and
viceversa
Push once Select the readings of the first circuit
Pushing once during the programming To change the parameter code or value
UP KEY
Push for 1 second during the programming
1 time shows the Pr2 programming level
2 time shows the Pr3 programming level
Push once Select the readings of the second circuit
TASTO DOWN
Pushing one time during the programming To change the parameter code or value
Push once
Turn the chiller on, if the unit is on led is on
The led is blinking if there is a power on delay or during the pump
down
Push once
Turn the heat pump on, if the unit is on led is on
The led is blinking if there is a power on delay or during the pump
down
Push once enter the function Menu
Push for 3 seconds To set RTC parameters (if the RTC is inside)
Pushing once during the programming To exit from a group of parameter
Push once
Start the heating recovery of the chiller unit, with recovery active
the led is on
Push once
Start the free cooling of chiller unit, with free cooling active the led
is on