Dish Network DuoDVR ViP 722k, Руководство пользователя

Страница: 88 / 171

78
Operating Other Devices
Chapter 10
O
PERATING
O
THER
D
EVICES
To use the remote to control other devices (such as a TV, VCR, DVD/Blu-ray Disc TM player
tuner, amplifier, or another compatible DISH receiver), you must first program it to control
these other devices. You can do this by any of the following procedures:
• Programming Using Device Code Tables on page 82.
• Programming Using Device Code Scan on page 83.
• Learning from Another Device’s Remote on page 85.
• Using the System Wizard on page 87.
Remote Control Modes
Use the remote control’s mode buttons, SAT (satellite receiver), TV (for a TV), DVD (for a
VCR or a DVD/Blu-ray Disc player), and AUX (“auxiliary,” for a second TV, DVD/VCR,
tuner, amplifier, or a second DISH receiver) to set the remote control to the right mode for
each device. To change the mode, firmly press the button for the device you want the
remote to control. The mode button lights for about two seconds to show you’ve set the
remote to that mode.
Limited Mode
You can program your remote control in Limited Mode to keep from accidentally changing
the channel on your TV or VCR. When you use the remote to control your TV in Limited
Mode, you will only be able to use the POWER, MUTE, and VOLUME buttons. Also, when
you use the remote to control your VCR (using the button for a DVD or AUX device) in
Limited Mode, you will only be able to use the POWER and VCR function buttons.
Turning Limited Mode On and Off
1
Press and hold the device mode button (for example, TV) for a few seconds until all of the
mode buttons light up. Release the mode button.
2
Press:
• PAGE UP to turn Limited Mode on.
• PAGE DOWN to turn Limited Mode off.
3
Press the POUND (#) button on the remote control.
Press POUND (#)
Press and hold the
correct Mode button until
all Mode buttons light.
Release Mode button
Press PAGE UP to
turn Limited Mode on.
Press PAGE DOWN to
turn Limited Mode off