Dish Network DuoDVR ViP 722k, Руководство пользователя

Страница: 136 / 171

126
Connecting an Over-the-Air Antenna
Chapter 12
Scanning for Over-the-Air Channels
With your over-the-air antenna adjusted for best reception, use these instructions to scan
for over-the-air channels on the nearby TV.
1
Make sure you have your over-the-air (OTA) antenna connected to the optional module’s
O
VER
-
THE
-A
IR
A
NTENNA
I
N
connection.
2
Press the MENU button, select System Setup , and then Local Channels . If this is the
first time you have opened the Local Channels screen, it will have no channels listed.
3
Scan for OTA channels by selecting Scan Locals .
4
The scan will take a few minutes to complete. When it finishes, the results will show how
many local channels the scan found.
Note : If the scan does not find any local channels, verify that the Analog Type is set to
Offair on the HDTV Setup screen. Press the MENU button, select System Setup , and
then HDTV Setup . If necessary, use the left or right ARROW keys to navigate to Analog
Type and then the up or down ARROW keys to change the setting to Offair. Select Done
when finished.
5
Select OK to go back to the Local Channels screen.
Note : If the channel number for a listed channel says None, you have not yet assigned
this channel a network affiliation or name. The arrow at the bottom left means that there
are more channels than can be displayed at once on the screen, which you can get to with
the ARROW keys if you wish to assign them networks, edit their names, or remove them.
6
If you want to name the over-the-air channels, continue to the next step. If you do not want
to name these channels, select
Done . You will then exit the menu screen and return to
watching TV.
7
Select a channel and then select Edit Name to modify the way the channel name displays
on your screen.
8
Use the virtual on-screen keyboard to select the characters to use for your channel name.
9
When you are finished making changes, select Done .
6
9
6
9