![Dish Network DuoDVR ViP 722k Скачать руководство пользователя страница 123](http://html1.mh-extra.com/html/dish-network/duodvr-vip-722k/duodvr-vip-722k_user-manual_2509170123.webp)
Connections and Setup
113
Connecting to the Nearby TV (TV1)
YPbPr Connections
The
YP
B
P
R
(component) connections provide high-quality video to your HDTV or HD
monitor. If an HDMI audio/video connection between your receiver and nearby TV is
unavailable or not applicable, then you should use component video with separate audio.
1
Connect between the
YP
B
P
R
component video connections on the receiver and the
nearby TV using component (usually red/green/blue) video cables.
2
Connect audio (red and white) RCA-type cables between the receiver
A
UDIO
O
UTPUTS
and
audio input connections that go with the YPbPr connectors on your HDTV or monitor.
3
If you do not see a picture yet, change the resolution setting on the receiver. Use the steps
below and
Setting Up to Display in HD
on
page 114
.
4
Turn up the volume on your HDTV and confirm that you hear sound. Check the RCA-type
audio connections if you don’t hear sound.
No Picture on the Nearby TV
This section will help you make a picture appear on the nearby TV in case you could not
do so in the previous sections.
1
Connect the three RCA-type cable connections (yellow for video and red/white for audio)
between the receiver
TV1 O
UT
and the nearby TV.
2
Make sure that both the receiver and nearby TV are turned on (not in standby or power-
saving mode).
3
Make sure the nearby TV is set to view the RCA-type audio/video inputs or source. Look
on the back of your HDTV or consult your HDTV user’s guide for more information.
4
Change the receiver’s HDTV settings, as described on page 114.
5
Switch to the nearby TV to display from the HD inputs (HDMI or component video) that
you selected in the previous sections. If you have a picture from TV1, you are finished.
6
Repeat steps 4 and 5 until the nearby TV displays a video image from the receiver.
3
4
Connect receiver
and monitor with
YPbPr Component
connections
Turn monitor
and receiver on
and confirm
picture
Confirm
sound and
volume
2
Connect receiver and
monitor with Audio cables
1
AUDIO
L
R
Содержание DuoDVR ViP 722k
Страница 20: ...10 Notes Chapter 1 Notes...
Страница 155: ...145 What you ll find in this chapter LIMITED WARRANTY RESIDENTIAL CUSTOMER AGREEMENT FCC COMPLIANCE Appendix...
Страница 170: ...160 160...