![Dish Network DuoDVR ViP 722k Скачать руководство пользователя страница 134](http://html1.mh-extra.com/html/dish-network/duodvr-vip-722k/duodvr-vip-722k_user-manual_2509170134.webp)
124
Connecting a VCR to the Remote TV
Chapter 12
C
ONNECTING A
VCR
TO THE
R
EMOTE
TV
Below is an example of how to connect a VCR to your satellite TV system.
Note
: Connecting your TV directly to the satellite receiver provides the best audio and
video quality.
1
Connect the tuner input of the remote VCR to an existing cable wall outlet using a coaxial
cable.
2
Connect a coaxial cable from the VCR’s rear output to the remote TV’s tuner port.
3
Plug in the power cables and turn on both the remote VCR and TV.
4
Tune the remote VCR to the remote TV channel that you use to watch satellite TV
programming (for example, channel 60), which was set up on page 116.
5
Write down the channel number you tuned your VCR to in the previous step on one of the
TV2 channel stickers. Place the sticker on or near the VCR. This sticker will remind you
which VCR channel to use to watch satellite TV programming. The stickers are located in
inside the front cover of this guide.
6
Set the VCR output to channel 3 or 4, as applicable.
7
Tune the remote TV to the same channel that you set your VCR output to in step 6.
8
Write down the channel number you tuned your TV to in the previous step on one of the
TV2 channel stickers. Place the sticker on or near the TV. This sticker will remind you
which channel to use to watch satellite TV programming. The stickers are located inside
the front cover of this guide.
For this installation, always leave your VCR powered on so that the TV can
receive satellite programming. If you turn off your VCR, your TV will not be
tuned to the correct channel to receive satellite TV programming.
Содержание DuoDVR ViP 722k
Страница 20: ...10 Notes Chapter 1 Notes...
Страница 155: ...145 What you ll find in this chapter LIMITED WARRANTY RESIDENTIAL CUSTOMER AGREEMENT FCC COMPLIANCE Appendix...
Страница 170: ...160 160...