Dish Network DuoDVR ViP 722k, Руководство пользователя

Страница: 27 / 171

Satellite Receiver
17
Remote Control
Remote Control Batteries
The remote control comes with four AAA batteries. When you replace old
batteries, you should replace all of the batteries. Use batteries of the same
type together, for example, all alkaline or carbon zinc. Don’t mix batteries of
different chemistries. Alkaline batteries last longer than carbon zinc.
1
Press down on the dimple at the top of the battery cover on the back of the
remote control and slide off the cover.
2
Take out all four of the old batteries.
3
Put in the new batteries. Make sure you match the plus (“+”) ends with the
plus markings on the battery case.
4
Slide the battery cover back into place on the back of the remote.
Low Battery Warning
When you see a low-battery warning message on your screen below the Program Banner,
the batteries in your remote control are weak and need to be replaced.
Attach the Remote Control Antenna
Attach the remote control antenna to the R
EMOTE
A
NTENNA
connection on the receiver's
back panel so you can use your UHF Pro Remote Control 2. Without the remote control
antenna attached, you cannot use this remote to control the receiver. See
Adjusting the
Remote Control Antenna on page 76 for more detailed information about improving the
performance of your UHF Pro Remote Control 2.