Dish Network Dish 322, Руководство пользователя

Страница: 6 / 128

Chapter 1
Page 2
Introduction
Two remote controls come with your receiver:
• An infrared (IR) remote to control programming for the nearby TV.
This remote is labeled with a green number 1, which matches similar
markings on the receiver output connections and the menus for the
nearby TV.
• An Ultra-High Frequency Pro (UHF Pro) remote to control
programming to a remote TV. This remote is labeled with blue
number 2, which matches the similar markings on the receiver
output connections and the menus for the remote TV.
Overview
Before you use your satellite receiver, the system must be installed. Please
call the Customer Service Center at 1-800-333-DISH (3474) to schedule an
installation.
A vital part of the installation is to set up the receiver to get the
latest software from the satellite signal. If you need the latest
software, follow the instructions under
System Updates in
Chapter 3 .
For information on the receiver and its installation, read
Chapter 2, Receiver Description and Installation , beginning on page 13.
For information on any specific feature or function, read Chapter 3, Using
The System , beginning on page 37.
If you have a problem operating the system or receive an error message, use
the
Troubleshooting Tables beginning on page 89.
Tips
In the margins of pages throughout this guide are tips and other information
to make using your satellite receiver easier.
Conventions
To make it easy for you to use this guide, we use the following conventions.
• The names of remote control buttons are all uppercase.
Example: Press the
SAT
button.
• Menus and options that appear on the TV screen are in bold type.
Example: Open the
Program Guide
.
• Select means to move the highlight to an on-screen option or choice
in a list and press the
SELECT
button on the remote control.
Example: Select the
Locks
option.
• Connections on the back of the receiver are in small capital letters.
Example:
S
AT
I
N
• Where this guide mentions nearby TV , it refers to the TV near the
receiver. The nearby TV receives TV1 menus and programming
from the receiver’s TV1 outputs and is connected using short audio/
video cables.