Dish Network Dish 322, Руководство пользователя

Страница: 39 / 128

Page 35
Setting Up TV1 to Operate in IR
Setting Up TV1 to Operate in IR
The following instructions describe how to set up TV1 to operate in IR only.
1. Perform the following with an existing remote control:
a. Open the
TV1 UHF Pro Setup
screen by pressing MENU-6-1-8 on
the remote control.
b. Select
Disable
from the
TV1 UHF Pro Setup
screen.
c. Select
System Info
to open the
System Info
screen.
2. Using an IR remote control, such as a Remote Control 3.4, that you
intend to use to control TV1:
a. Press the RECORD button. The
Done
button should be
highlighted.
b. Make sure the
System Info
screen shows that the
Primary Remote
Address
shows
IR
.