Dish Network Dish 322, Руководство пользователя

Страница: 41 / 128

Page 37
Using the Remote Controls
This section describes how to use the remote controls with your satellite
receiver. The remote control must be in SAT mode for the buttons to control the
satellite receiver. You can also use the remote to control your VCR and other
devices (see Control Other Devices with the Remote Controls on page 75).
SAT Mode Button
Press the SAT mode button to set the remote to SAT mode and to control the
receiver. The SAT mode button’s back light turns ON briefly to show that the
remote is set to SAT mode.
Power Buttons
Press the blank POWER button to turn the TV1 or TV2 (depending on which
remote is being used) on or off. Press the TV POWER button to turn the TV on
or off.
Note
: You must program the remote to control your TV for the TV POWER
button to work as described. See page 75 for instructions.
Menu Button
Press the MENU button to open the
Main Menu
.
Page Up and Page Down (Arrow) Buttons
Press the PAGE UP button or the PAGE DOWN button to move, page by
page, through the
Program Guide
, a
Theme
list, a
Favorites List
, an
Event
Timers
list, or a list of channels.
Mute Button
Press the MUTE button to turn off the TV sound. Press it again to restore the TV
sound.
Note
: You must program the remote to control your TV for the MUTE button to
work as described. See page 75 for instructions.
Tip: Remote
Control 1 is used to
control TV1 menus
on the nearby TV.
Remote Control 2
is used to control
TV2 menus on the
remote TV(s).
Chapter 3
Using the System