Dish Network Dish 322, Руководство пользователя

Страница: 37 / 128

Page 33
Optimize Your Remote Controls
Attach a UHF Attenuator
Stray UHF signals can block signals from the remote control to the receiver.
To prevent blocks, you can install a 10 dB attenuator (you can buy one from
a consumer electronics parts store).
Note
: This will help keep out stray UHF signals, but also reduces how far
away you can use the remote control.
1. Take the UHF antenna off of the
receiver’s back panel UHF Remote
Antenna input.
2. Put a 10 dB attenuator onto the UHF
Remote Antenna input.
3. Put the UHF antenna onto the
attenuator.