Part 3 - Configuration
57
IP Address
Designate the IP address type as Manual or
DHCP
.
Manual
•
Set
Type
to Manual.
Manual
lets you configure related settings manually.
Configure
IP Address
,
Gateway
, and
Subnet
Mask
settings manually using the remote control's
arrow buttons.
•
DNS Server
: Enter the DNS server's IP address.
•
Remote Port
: The port used by the remote
program to connect to the NVR. Choose a value
between 8000 and 12000.
•
Remote Callback
: Set the port number using for
remote callback.
•
If using a firewall, select Change Port to change
the port number to one that is permitted by the
firewall.
•
Changing the port temporarily severs the NVR's
remote connection.
Remote point IP and port settings on the remote
program must also be changed in order for it to
connect to the NVR.
•
To use the
UPnP
(Universal Plug and Play) feature,
select
Use UPnP
. If using an IP router (or NAT),
UPnP service allows the device to automatically
forward the port to the NVR.
•
This port is used to access a port that has a
private IP address.
•
In order to use the UPnP service, the IP router
(or NAT) must support UPnP port forwarding and
have the relevant options enabled.
•
Port number cannot be changed with
Use UPnP
selected.
•
Status
: Indicates the number of the port forwarded
by the IP router (or NAT) to the NVR via UPnP
service.
DHCP
Select
DHCP
and then
Save
to retrieve IP address
and other network settings automatically from the
DHCP server. Once the network settings have been
retrieved, the NVR's current IP address is displayed in
the IP Address field.
•
It may not be possible to retrieve the IP address
if there is no DHCP server. If this is the case,
contact your network administrator.
•
With DHCP, the NVR's IP address might change
with each startup.
There is a limit to the number of users allowed to
connect remotely at the same time. Contact the
service center for more information.
Содержание XR408
Страница 1: ...Network Video Recorder Operation Manual XR408 XR616 XR632...
Страница 86: ......
