Direct IP XR408, Руководство по эксплуатации

Страница: 50 / 86

Part 3 - Configuration
50
Pre-Event
When an event occurs, enabling this option includes
the specified duration prior to the event in the event-
triggered recording.
• No. : Select which cameras to apply Pre-Event to.
• Video Profile : Select a video profile for the
recording.
•
Dwell
: Specify the duration of pre-event recording
data.
• If no event mode schedule exists in the schedule,
a warning message prompting you to add an
event mode schedule will be displayed.
• The warning message will appear even in Time &
Event mode.
Event Setup
Refer to the Menu Use on page 34 for basic
information on using the Setup menus.
Video-Analytics
Video-Analytics methods are Motion, Trip Zone, and
Tampering.
Motion
•
No.
: Select which cameras to apply Motion
Detection to.
•
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
•
Zone
: Define the motion detection block.
Use the remote control's arrow buttons to move the
block selection window up, down, left, and right. The
selection window consists of 8 blocks per row. Select/
deselect individual blocks using the
Camera buttons.
You can use the mouse to drag the zone and then
select, clear, or reverse the selection.
From the zone selection screen, press the
button
on the remote control or right-click on the mouse to
open up the Zone Setup menu.