15
Tongue
The drawbar lock plate
(yellow) is meant to act as a
lock during transport.
Remove the hardware
affixing it to the frame and
discard the hardware and
the locking plate.
Setup Instructions
Refer to the operator's manual for additional preparation information.
Tractor connections
The hydraulic lines are heavy. Do not route electrical lines
through the same rung as the hydraulic lines.
Route the hydraulic lines, through the handle, between the
1
st
and 2
nd
rung.
Route the hydraulic lines, through the handle, between the
2
nd
and 3
rd
rung.
Tractor setup (see operator’s manual)
Scorpion 300/2430:
Connect the “P” line to an SCV with continuous flow set at 10l/min (2.5gpm)
Connect the “T” line to a ‘Motor Return’ port on the tractor. Connecting to an SCV might trap
pressure or increase return line pressure and cause hydraulic malfunction.
********************************
Scorpion 350:
Always ensure the tractor is OFF before making connections
Ensure correct couplers are equipped
To prevent damage to the hydraulic system
Connections should be made in order of: D, T, LS, P
Disconnect in this order: P, LS, T, D
Rungs
1
st
2
nd
3
rd
