8
Light Installation (left side)
Locate the lights in a carton
underneath the butterfly guards
of the harvester.
The cable on the harvester is
secured in place for transport.
Open the main guard and cut the
cable ties.
Remove and keep the fasteners
for the light assembly.
Pull the cable through the
opening.
Use the cable ties in the toolbox
to affix the cable to the arm.
Place the connector as shown
and loop any excess cable.
Insert the light assembly through
the opening.
Fasten the assembly with the
hardware you removed earlier.
The light assembly can be
installed to accommodate 2
widths. Install according to the
desired width.
Cut cable ties.
Pull the cable out.
Fasten light bar.