10
Attach the extension to the pole with the
provided bolts.
The cable is looped within the frame section for
transport. Cut it free.
Pass the wire of the harvester through the light
pole and guide it through the oblong hole.
Prior to fastening the cable, ensure to leave
sufficient slack in the cable for when the light is
the raised position.
Loop excess wire and fasten with cable ties and
ensure wires do net get pinched.
Use this locking pin when the extension arm is in
the up or down position.
Ensure the cable is not pinched when the
extension arm is lowered to the down position.
Extension arm in the ‘down’ position.
Extension arm in the ‘up’ position.
Locking pin (down)
Locking pin (up)
