9
Light Installation (right side)
Install the correct light assembly according to the header being used.
If the header is one of the following, no extension
is required:
Hay pick up F46 – 2.13m (84”)
3 Row corn head F64 – 2.3m (90”)
If the header is one of the following, an extension
must be used:
Hay pick up F71 – 2.74m (108”)
4 Row corn head F61 – 3m (120”)
Removing the extension arm to make the short
base:
Unscrew the 4 bolts securing the light to the
extension.
Install the light onto the main support using the
same hardware.
Ensure the wires are not pinched during the
installation.
Affix the cable to the assembly using cable ties.
Without extension.
With extension.
Install the light onto
the main support.
Extension removed.
Remove the light.
