4
WARNING: Approaching the
harvester without minding
the forks may result in severe
damage to the kernel processor.
Assistance is required when
setting up to lift the harvester.
Have a guide present to ensure
no contact is made between the
forks and the processor
assembly.
NEVER place the harvester
directly on the ground.
Ensure the harvester is properly
supported on blocks with a
minimum height of 6” (15cm) at
3 points as described.
1 point under the left axle.
1 point under the right header
attachment location.
1 point at the tongue, supported
by a block of wood OR the jack
stand which the harvester is
equipped with.
Kernel processor
assembly.
Fork pick up point under
the harvester frame.
