Digital Projection Mercury HD, Руководство пользователя

Страница: 87 / 110

8-21
Digital Projection
MERCURY HD
8. Using the On-Screen Menus
WEP (for Wireless only)
Select this option whether using the WEP (Wired Equivalent
Privacy) key for encryption or not. To use encryption, specify
WEP key.
Disable ........ Will not turn on the encryption feature. Your
communications may be monitored by
someone.
64bit ............ Uses 64-bit datalength for secure
transmission.
128bit .......... Uses 128-bit datalength for secure
transmission. This option will increase privacy
and security when compared to use of 64bit
datalength encryption.
NOTE: The WEP settings must be the same as communication devices
such as PC or access point in your wireless network. When you use
WEP, your image transmission speed will slow down.
Key Select:
Selects one key from the four keys below when selecting
[64bit] or [128bit] in [WEP].
Key1-4:
Enter encryption key when selecting [64bit] or [128bit] in
[WEP].
Up to 5 characters can be set in 64 bit and up to 13
characters in 128 bit. Press the “HEX” button to change to
“ASCII” to set the key in ASCII digit. You can toggle this
button between “ASCII” and “HEX”.
The key can also be set in hexadecimal digit.
* Hexadecimal uses 0 to 9 and A to F.
* Up to 10 characters can be set in 64 bit and up to 26
characters in 128 bit.
NOTE: Only numbers can be entered when you use the remote control
Source/Input buttons.
DHCP
Depending on your network environment, acquiring an IP ad-
dress from a DHCP server may not be possible.
Should this happen, consult your network administrator to make
changes to the following settings.
Host Name option
Select whether or not to add option hostname for DHCP.
None ......................... Not add
Request .................... Add at the time of DHCP_REQUEST.
Discover/Request .... Add at the time of DHCP_DISCOVER
and DHCP_REQUEST.
Host Name
Type in a hostname. This field is available only when
“Request” or “Discover/Request.”
Client-identifier option
Select whether or not to add option client identifier for
DHCP.
None ......................... Not add
Request .................... Add at the time of DHCP_REQUEST.
Discover/Request .... Add at the time of DHCP_DISCOVER
and DHCP_REQUEST.
Use MAC address
Turn on to use MAC address for Client-identifier.
Client-identifier
Type in a client identifier.