Digital Projection Mercury HD, Руководство пользователя

Страница: 5 / 110

v
Power Supply
1. The projector is designed to operate on a power supply of
100-240 V 50/60 Hz AC. Ensure that your power supply fits this
requirement before attempting to use your projector.
2. Handle the power cable carefully and avoid excessive bending.
A damaged cord can cause electric shock or fire.
3. If the projector is not to be used for an extended period of time,
disconnect the plug from the power outlet.
4. Do not touch the power plug with wet hand. Doing so can
cause electrical shock or fire.
5. Do not touch the power plug during a thunder storm. Doing so
can cause electrical shock or fire.
Cleaning
1. Unplug the projector before cleaning.
2. Clean the cabinet periodically with a damp cloth. If heavily
soiled, use a mild detergent. Never use strong detergents or
solvents such as alcohol or thinner.
3. Use a blower or lens paper to clean the lens, and be careful not
to scratch or mar the lens.
CAUTION
Do not unplug the power cable from the wall outlet under any one
of the following circumstances. Doing so can cause damage to the
projector:
• While the message "Please wait a moment." appears. This
message will be displayed after the projector is turned off.
• Immediately after the power cable is plugged into the wall outlet
(the POWER indicator has not changed to a steady orange
glow).
• Immediately after the cooling fan stops working (The cooling fan
continues to work for 90 seconds after the projector is turned
off).
CAUTION
• Do not try to touch the ventilation outlets as they can become
heated while the projector is turned on.
• Do not put the projector on its side when the lamp is turned on.
Doing so may cause damage to the projector.
• Before shipping this projector, remove the lens and attach the
lens hood cap.
The Lens Shift mechanism may encounter damage caused by
improper handling during transportation.
• Do not eject a PC card or LAN card while its data is being
accessed. Doing so can damage your PC card or LAN card.
Lamp Replacement
• To replace the lamp, follow all instructions provided on page 9-2.
• Be sure to replace the lamp when the message "The Lamp has
reached the end of its usable life. Please replace the lamp."
appears. If you continue to use the lamp after the lamp has
reached the end of its usable life, the lamp bulb may shatter,
and pieces of glass may be scattered in the lamp case.
CAUTION
: Do not touch them as the pieces of glass may
cause injury. If this happens, contact your Digital Projection
dealer for lamp replacement.
• Allow a minimum of 90 seconds to elapse after turning off the
projector. Then turn off the main power and disconnect the
power cable and allow 15 minutes to cool the projector before
replacing the lamp.
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents are
unobstructed to prevent the build-up of heat inside your
projector. Allow at least 3 inches (10 cm) of space between your
projector and a wall, except to the rear and the ventilation outlet
on the right side, where there should be at least 12 inches
(30cm) of space.
2. Prevent foreign objects such as paper clips and bits of paper
from falling into your projector. Do not attempt to retrieve any
objects that might fall into your projector. Do not insert any metal
objects such as a wire or screwdriver into your projector. If
something should fall into your projector, disconnect it
immediately and have the object removed by a qualified Digital
Projection service personnel.
3. Do not place any liquids on top of your projector.
4. When using a LAN cable:
For safety, do not connect to the connector for peripheral device
wiring that might have excessive Voltage.
CAUTION
• Do not look into the lens while the projector is on. Serious
damage to your eyes could result.
• Keep any items such as magnifying glass out of the light path of
the projector. The light being projected from the lens is
extensive, therefore any kind of abnormal objects that can
redirect light coming out of the lens, can cause unpredictable
outcome such as fire or injury to the eyes.
• Do not cover the lens with the supplied lens hood cap or
equivalent while the projector is on. Doing so can lead to melting
of the cap and possibly burning your hands due to the heat
emitted from the light output.
Digital Projection
MERCURY HD
Important Information
7. If you wish to have the projector installed on the ceiling:
a. Do not attempt to install the projector yourself.
b. The projector must be installed by qualified technicians in
order to ensure proper operation and reduce the risk of
bodily injury.
c. In addition, the ceiling must be strong enough to support the
projector and the installation must be in accordance with
any local building codes.
d. Please consult your dealer for more information.
To Dealer or Installer:
To prevent the projector from falling, install it in a place and fasten
it in a way with sufficient strength to support the combined weight
of the projector (25 kg / 55 lbs), the lens and any mounting
hardware, for an extended period of time as well as to withstand
earthquakes.