Digital Projection Mercury HD, Руководство пользователя

Страница: 17 / 110

1-9
Digital Projection
MERCURY HD
1. Introduction
ENTER
CANCEL
UNDO
AUTO
HELP
ON
TEST
ABC
1
DEF
2
GHI
3
JKL
4
MNO
5
PQR
6
STU
7
VWX
8
0
YZ/
9
POWER INPUT
OFF
INFO
PIXEL SOUND OSD
MAGNIFY/
CTL
FOCUS
+
-
ZOOM
+
MENU/ ADDRESS
IMAGE/ PROJECTOR
POSI/ LENS
KEY ST./
ON
OFF
R E-LIST/
PICTURE
ADJUST
WHITE BAL.
B AMP/ G
PICT/ SHUT
-
MUTE
2
13
28
8
7
6
22
21
15
17
16
3
10
11
26
27
9
23
14
12
19
18
20
5
4
25
24
1
4
Remote Control Features
1. POWER ON
Press and hold this button for a minimum of two seconds to
turn on the projector when the main power is supplied and
the projector is in standby mode or idle mode.
2. POWER OFF
Press and hold this button for a minimum of two seconds to
turn off the projector.
3. MENU
Press to display the main menu.
While pressing and holding CTL, press this button to display
the Remote Control ID dialog box to specify the remote
control ID. See page 7-2.
4. ENTER
Executes the menu selection and activates items selected
from the menu. When the slider or dialog box is displayed:
Pressing this button confirms adjustments/setting and
returns to the previous menu display.
5. Select (Up/Down/Left/Right)
: Use these buttons to select the menu of the item you
wish to adjust.
When no menus appear, these buttons work as a
volume control.
: Use these buttons to change the level of a selected
menu item.
A press of the button executes the selection.
Pressing and holding CTL, then pressing button works as
a Back Space key in the entry screen.
Pressing and holding CTL, then pressing this button moves
the menu, slider, toolbar or dialog box.
6. ADJUST WHITE BAL.
Press to display the Picture Management screen.
7. ADJUST PICTURE
Press to display the Picture adjustment screen. Pressing this
button sequentially selects adjustment screens.
8. IMAGE/PROJECTOR
Press to display the Image Option screen. Pressing this
button sequentially selects Image Options screens.
While pressing and holding CTL, pressing this button rotates
Projector Options screens.
9. Source / Input
Press to select input or to name a signal.
1 Selects RGB 1 input.
2 Selects RGB 2 input.
3 Selects DVI (DIGITAL) input.
4 Selects VIDEO input.
5 Selects S-VIDEO input.
6 Selects Viewer input
7 Selects LAN input
8 Selects OPTION SLOT 1* (optional RGB or SDI board)
9 Selects OPTION SLOT 2* (optional RGB or SDI board)
0 Sequentially selects: RGB1 (VIDEO)
→
RGB1 (S-VIDEO)
→
* This button toggles between input 1 and 2.
NOTE: While pressing and holding CTL, pressing this button
switches to the selected signal found in the Entry List.