Digital Projection Mercury HD, Руководство пользователя

Страница: 27 / 110

2-7
Digital Projection
MERCURY HD
2. Installation
To connect SCART output (RGB)
Before connections: An exclusive SCART adapter (ADP-
SC1) and a commercially available SCART cable are
required for this connection.
NOTE:
• Audio signal is not available for this connection.
• The RGB 1 IN connector does not support Plug & Play.
Video equipment
such as DVD
player
Projector
ADP-SC1 Commercially available
SCART cable Female
1. Turn off the power to the projector and your video equipment.
2. Use the ADP-SC1 SCART adapter and a commercially available
SCART cable to connect the RGB 2 input of your projector and a
SCART output (RGB) of your video equipment.
3. Turn on the power to the projector and your video equipment.
4. Use the RGB 2 button on the remote control to select the RGB 2
input.
5. Press the MENU button on the remote control to display the menu.
6. From the Advanced menu, select [Projector Options]
∅
[Setup]
∅
[Page 3]
∅
[Signal Select RGB2]
∅
[Scart].
SCART is a standard European audio-visual connector for TVs, VCRs
and DVD players. It is also referred to as Euro-connector.
NOTE: The ADP-SC1 SCART adapter is obtainable from your Digital
Projection dealer. Contact your Digital Projection dealer for more
information.
To RGB 2 IN
Connecting an External Monitor
You can connect a separate, external monitor to your
projector to simultaneously view on a monitor the RGB analog
image you're projecting. To do so:
1. Turn off the power to your projector, monitor and computer.
2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D-
Sub 15 pin) connector on your projector.
3. Turn on the projector, monitor and the computer.
NOTE:
• The RGB OUT connector outputs RGB signal during idle mode (See
page 8-15). When the projector goes into idle mode, the image on an
external monitor disappears for a moment. Note that the RGB OUT
connector will not output RGB signal during Standby mode.
• When the projector is in the Idle mode, the image may not be
correctly displayed while the cooling fans are running immediately
after turning on or off the power. Note that the RGB OUT connector
will not output RGB signal during Standby mode.
• Daisy chain connection is not possible.
RGB signal cable
(not supplied)
To mini D-Sub 15-pin
connector on the projector.
Audio cable
(not supplied)
Audio cable
(not supplied)
RGB signal cable
(not supplied)
To mini D-Sub 15-pin
connector on the projector.