Digital Projection Mercury HD, Руководство пользователя

Страница: 64 / 110

7-4
7. Double Stacking and Link Mode Digital Projection
MERCURY HD
Hookup
1. Use commercially available RGB signal cables to connect the RGB output of the master projector to the RGB input of the
slave projector until all the projectors are connected.
2. Next, using a commercially available, bi-directional RS-232C cable connect the PC CONTROL OUT terminal of the master
projector to the PC CONTROL IN terminal of the slave projector until all the projectors are connected.
3. Turn all the projectors on and roughly make some optical adjustments to each projector.
Bi-directional RS232C cable
(not supplied)
S-Video cables
(not supplied)
Distribution amplifer
Example: Composite signal
S-Video cable
(not supplied)
Video equipment
NOTE: Connect a commercially available distribution amplifier to both the
master and the slave projectors to distribute signal to two outputs of
the master and the slave projectors.