Digital Projection Mercury HD, Руководство пользователя

Страница: 28 / 110

2-8
2. Installation Digital Projection
MERCURY HD
Connecting Your DVD Player
DVD player
You can connect your projector to a DVD player with
component output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a
commercially available component video cable (RCAX3) and the
optional 15-pin-to-RCA (female) x 3 cable to connect your DVD player
to the RGB 1 IN or 2 IN connector on the projector.
For a DVD player without a component video (Y,Cb,Cr) output, use an
Component video RCA x 3 cable
(not supplied)
S-Video cable (not supplied) to connect an S-Video output of the
DVD player to the S-Video input of the projector. Use an appropriate
type of audio cable (not supplied) to connect the desired type of
audio from your DVD player to your audio equipment.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information
about your DVD player's video output requirements,
Optional 15-pin-to-RCA
(female) x 3 cable (ADP-CV1)
Audio cable (not supplied)
Audio Equipment
RCA(female)-to-BNC(male)
adapter (not supplied)
Audio cable (not supplied)