XTLplus Series Installation and Programming Guide | Digital Monitoring Products
39
Pet Immunity
This option displays for the 1122 Wireless PIR Motion Detector. Select whether or
not to enable pet immunity. Selecting
YES
allows pet immunity for animals up to 55
pounds.
Next Zone
Select YES to return to the ZONE NO option to program a new zone. Select NO to
display the Alarm Action option. See
1144 Series Key Fobs
Only zones 51-54 or 61-64 can be programmed as 1144 Series Key Fob zones. Refer to the
1144 Series Key Fob Install Guide (LT-1449)
as needed.
To operate arming and disarming properly, the Key Fob should be assigned to a User Number with appropriate area
assignments, however, the User Number does not have to exist at the time the Key Fob is programmed.
The following programming continues from when Key Fob YES is selected.
Key Fob User Number
Enter the User Number used to identify the key fob user and their arming and
disarming authority. Default is blank. User number range: 1 to 99
Displays when the User Number entered does not exist in User Code programming.
Key Fob Serial Number
Enter the 8-digit serial number found on the wireless device.
Displays when the serial number is already programmed. The programmed zone
number displays.
Key Fob Supervision Time
Press any top row Select Key or Area to select the supervision time required for the
key fob zone. Press
CMD
to accept the default time. Default is
0
.
Press the Select Key or Area under the required number of minutes. The key fob
must check in at least once during this time or a missing condition is indicated for
that zone. 1144 Series key fobs automatically checkin based on the supervision
time selected for the wireless zone, no additional programming is needed. Zero (0)
indicates an unsupervised transmitter.
Note:
When the panel is reset the supervision timer restarts for all wireless
zones.
Number of Key Fob Buttons
Enter the number of buttons (1, 2, or 4) on the key fob being programmed. Default is
4
(four buttons).
Key Fob Button Selection (Four Buttons)
This option only displays if the key fob being programmed is a four-button model
Press the Select Key under the key fob button to program. Refer to
.
The following list identifies the default button assignments:
▶
TOP
Arming with areas 1, 2, and 3 assigned
▶
BTM
Disarming with areas 1, 2, and 3 assigned
▶
LFT
Panic Alarm (PN) with no output assigned
▶
RGT
Arming with Area 1 assigned
WIRELESS PIR PET
IMMUNITY:
NO YES
NEXT ZN
NO YES
KF USER NO:
NOT IN USE
SERIAL #: -
ALREADY USED ZXX
SUPRVSN TIME:
0
0
60 240
BUTTONS:
4
TOP BTM LFT RGT