XTLplus Series Installation and Programming Guide | Digital Monitoring Products
36
Arming Zone Operation
If a bad (faulted) Priority zone is in the area being armed by an Arming zone, the
arming is stopped. If there are no Priority zones, or they are all in a normal condition,
the following applies:
When a non-Priority zone is bad when an area is armed with a keyswitch on an
Arming zone, the arming is delayed for five seconds. If, during the five-second delay,
the keyswitch is turned to disarm, the arming stops. If the keyswitch is held in the
arming position for the full five seconds, the bad zone is force armed and the area is
armed.
The ability to stop the arming does not apply if a wireless arming device is being
used.
Note:
Arming from a zone, Wi-Fi, or Remote Link is not affected by this
operation.
Area Assignment
To change the default area, press any Select Key or Area.
For Area systems, enter the area number from 1 to 6 where this zone is being
assigned and what it will arm or disarm as.
For All/Perimeter systems, choose INT or PERIM.
For Home/Away systems, choose INT, BDRM, or PERIM.
▶
INT (Interior)
Assigns the zone to Interior.
▶
BDRM (Bedroom) Assigns the zone to Bedrooms. This option is only displayed
in Home/Away systems under Sleep.
▶
PERIM (Perimeter) Assigns the zone to Perimeter.
Style
This option specifies the style for the arming/disarming operation. The default for
STYLE is TGL (toggle). Pressing any Select Key or Area displays the STYLE options.
To view more style options press
CMD
.
TGL
(Toggle)
When the zone changes from normal to shorted, the programmed areas toggle
between the armed or disarmed condition.
When restored to normal, no action occurs.
When the zone is opened from a disarmed state, a trouble is reported.
When opened from an armed state, an alarm is reported and the zone is disabled until
you disarm the area(s) from either a keypad, Remote Link™, or Virtual Keypad™.
ARM
When the zone is shorted, the programmed areas are armed.
When restored to normal, no action occurs.
When the zone is opened from a disarmed state, a trouble is reported.
When opened from an armed state, an alarm is reported.
DIS
(Disarm)
When programmed as an Area system, a short will disarm the programmed areas.
When programmed as an All/Perimeter or Home/Away system, a short will disarm all
areas.
When restored to normal, no action occurs.
When the zone is opened from a disarmed state, a trouble is reported.
AREA: -
INT
PERIM
INT
BDRM PERIM
STYLE:
TOGGLE
TGL ARM DIS STEP
TGL ARM DIS STEP
TGL ARM DIS STEP