XTLplus Series Installation and Programming Guide | Digital Monitoring Products
21
REMOTE OPTIONS
Remote Options
In this section you can enter the information needed for Remote Command and
Remote Programming operation through Wi-Fi or Network communication.
Remote Key
This option allows you to enter a code of up to eight digits for use in verifying the
authority of an alarm or to allow remote connections to perform a remote command/
programming session. The receiver must give the correct key to the panel before
being allowed access. All panels are shipped from the factory with the Remote Key
preset as blank.
To enter a new Remote Key, press any Select Key or Area and enter any combination
of up to eight digits. The numbers you enter appear as asterisks. Press
CMD
.
Remote Disarm
Select
YES
to enable the panel to be disarmed remotely. Select NO to disable remote
disarming. Default is
YES
.
App Key (For EASYconnect only)
Enter the 8-digit App Key obtained in your Dealer Settings tab in Dealer Admin
).
This communication option is used to eliminate the need for a static IP address
programmed in Network Options.
To enter the App Key, press any Select Key or Area and enter any combination of
eight digits.
Press
CMD
. The default for this option is blank.
REMOTE OPTIONS
RMT KEY:
DISARM
NO
YES
APP KEY: