Digital Equipment RW504-ZA, Руководство по обслуживанию

Страница: 188 / 220

Table A–2 (Cont.) Autochanger Move Errors
Error
Codes
Failure Description
2A Failure while moving the picker fingers back after inserting a cartridge into the
drive (destination).
30 Failure while moving the picker fingers forward to engage the cartridge in the
mailslot (source).
32 Failure while moving the picker fingers back to remove the cartridge from the
mailslot (source).
38 Failure while moving the picker fingers forward to insert the cartridge in the
mailslot (destination).
3A Failure while moving the picker fingers back after inserting the cartridge in the
mailslot (destination).
40 Failure while rotating the mailslot actuator inward.
42 Failure to ensure that the mailslot rotated inward.
48 Failure while rotating the mailslot actuator outward.
4A Failure to ensure that the mailslot rotated outward.
50 Failure while the finding the home position.
52 Failure while calibrating the carriage/picker assembly.
60 Initializing element status failed while testing an element with a cartridge in the
picker assembly.
80 Failure to remove a cartridge from a source element.
84 Failure to leave a cartridge properly in a destination element.
88 An obstruction was encountered before the cartridge had been inserted the proper
distance.
90 Source element unexpectedly empty.
94 Destination element unexpectedly full.
A0 Front mailslot sensor failed.
A2 Inside mailslot sensor failed.
A4 Drive light stuck on.
B0 Door interlock open.
A–10 Offline Diagnostic Information