Digital Equipment PRIORIS ZX 6000 MP SERIES, Руководство пользователя

Страница: 88 / 215

6-1
6
Installing Additional Memory
Introduction
By adding more memory, you can run larger and more complicated
software on your server. Your Prioris ZX 6000MP Series server supports
up to 2 GB of standard parity memory using single in-line memory
modules (SIMMs). Your server’s memory can be increased by adding
SIMMs on the main logic board (MLB) and optional memory modules.
NOTE:
The MLB must be fully populated before adding
optional memory modules. Two memory modules are
required when upgrading memory.
Also, you must order the SIMMs for the memory modules
separately.
This chapter provides the memory configuration guidelines that must be
followed prior to installing additional SIMMs into your Prioris ZX 6000MP
Series server. It also provides the procedures for installing additional
SIMMs on the MLB and memory modules, and for installing memory
modules.
Memory installation begins with Bank 0 on the MLB. Further upgrades
require that both memory modules be installed in order to support four-
way interleaving. Complete banks (8 SIMMs) must be installed in Bank 1
of both memory module 1 and 2 before adding SIMMs to Bank 2, etc.