Installing Your System
2–9
Connect the System Unit Power Cord
NOTE
Make sure the
l O
power switch on the rear panel of the system
unit is off (O).
The system accepts power inputs in the ranges of 100 Vac to 120 Vac and
200 Vac to 240 Vac, at 50 or 60 Hertz. Within these limits the power
supply is self-sensing, so the system unit does not need a voltage selection
switch.
Connect the supplied power cord to the power socket on the rear panel of
the system unit as shown. Connect the other end of the power cord to a
grounded power outlet.
MLO-002768
M A - 0 3 5 9 - 9 0 . D G
S y s t e m
P o w e r C o r d
