Digisol DG-FS4528P Скачать руководство пользователя страница 691

Страница: 691 / 973

HAPTER

| Link Aggregation Commands

– 691 –

Any of the 100BASE-TX ports can be trunked together. Any of the

Gigabit ports (Ports 25-28) on the front panel can also be trunked

together, including ports of different media types.

All the ports in a trunk have to be treated as a whole when moved

from/to, added or deleted from a VLAN via the specified port-channel.

STP, VLAN, and IGMP settings can only be made for the entire trunk via

the specified port-channel.

Dynamically Creating a Port Channel –

Ports assigned to a common port channel must meet the following criteria:

Ports must have the same LACP system priority.

Ports must have the same port admin key (Ethernet Interface).

If the port channel admin key (

lacp admin key

- Port Channel) is not set

when a channel group is formed (i.e., it has the null value of 0), this

key is set to the same value as the port admin key (

lacp admin key

Ethernet Interface) used by the interfaces that joined the group.

However, if the port channel admin key is set, then the port admin key

must be set to the same value for a port to be allowed to join a channel

group.

If a link goes down, LACP port priority is used to select the backup link.

channel-group

This command adds a port to a trunk. Use the

form to remove a port

from a trunk.

YNTAX

channel-group

channel-id

no channel-group

channel-id

- Trunk index (Range: 1-8)

EFAULT

ETTING

The current port will be added to this trunk.

OMMAND

ODE

Interface Configuration (Ethernet)

OMMAND

SAGE

When configuring static trunks, the switches must comply with the

Cisco EtherChannel standard.

Use

no channel-group

remove a port group from a trunk.

Use

no interface port-channel

to remove a trunk from the switch.

Содержание DG-FS4528P














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DG-FS4528P

Отзывы:

Бренды по названию

Популярные бренды

Digisol DG-FS4528P, Руководство по управлению

Результаты поиска

Содержание DG-FS4528P

Отзывы:

Бренды по названию

Популярные бренды