Digisol DG-FS4528P, Руководство по управлению

Страница: 221 / 973

C
HAPTER
7 | Security Measures
Access Control Lists
– 221 –
specify a range of addresses with the Address and Mask fields.
(Options: Any, Host, IP; Default: Any)
Sender/Target IP Address – Source or destination IP address.
Sender/Target IP Address Mask – Subnet mask for source or
destination address. (See the description for Subnet Mask on
page 212 .)
Sender/Target MAC Address Type – Use “Any” to include all
possible addresses, “Host” to indicate a specific MAC address, or “MAC”
to specify an address range with the Address and Mask fields.
(Options: Any, Host, MAC; Default: Any)
Sender/Target MAC Address – Source or destination MAC address.
Sender/Target MAC Address Mask – Hexadecimal mask for source
or destination MAC address.
Log Status – Logs a packet when it matches the access control entry.
W
EB
I
NTERFACE
To add rules to an ARP ACL:
1. Click Security, ACL.
2. Click Edit to open the configuration page for the required entry.
3. Specify the action (i.e., Permit or Deny).
4. Select the packet type (Request, Response, All).
5. Select the address type (Any, Host, or IP).
6. If you select “Host,” enter a specific address (e.g., 11-22-33-44-55-
66). If you select “IP,” enter a base address and a hexadecimal bit mask
for an address range.
7. Enable logging if required.
8. Click Add.