
C
HAPTER
7
| Security Measures
Configuring 802.1X Port Authentication
– 193 –
P
ARAMETERS
These parameters are displayed in the web interface:
Global Settings
Identity Profile User Name
– The dot1x supplicant user name.
(Range: 1-8 characters)
The global supplicant user name and password are used to identify this
switch as a supplicant when responding to an MD5 challenge from the
authenticator. These parameters must be set when this switch passes
client authentication requests to another authenticator on the network.
Identity Profile Password
– The dot1x supplicant password used to
identify this switch as a supplicant when responding to an MD5
challenge from the authenticator. (Range: 1-8 characters)
Port Settings
Port
– Port number.
PAE Supplicant
– Enables PAE supplicant mode. (Default: Disabled)
If the attached client must be authenticated through another device in
the network, supplicant status must be enabled.
Supplicant status can only be enabled if PAE Control Mode is set to
“Force-Authorized” on this port (see
"Configuring Authenticator Port
Settings for 802.1X" on page 190
).
PAE supplicant status cannot be enabled if a port is a member of trunk
or LACP is enabled on the port.
Authentication Period
– The time that a supplicant port waits for a
response from the authenticator. (Range: 1-65535 seconds;
Default: 30 seconds)
Hold Period
– The time that a supplicant port waits before resending
its credentials to find a new an authenticator. (Range: 1-65535
seconds; Default: 30 seconds)
Start Period
– The time that a supplicant port waits before resending
an EAPOL start frame to the authenticator. (Range: 1-65535 seconds;
Default: 30 seconds)
Maximum Start
– The maximum number of times that a port
supplicant will send an EAP start frame to the client before assuming
that the client is 802.1X unaware. (Range: 1-65535; Default: 3)
Authenticated
– Shows whether or not the supplicant has been
authenticated.
Содержание DG-FS4528P
