Digisol DG-FS4528P, Руководство по управлению

Страница: 503 / 973

C
HAPTER
22 | System Management Commands
Time
– 503 –
D
EFAULT
S
ETTING
GMT-Greenwich-Mean-Time-Dublin,Edinburgh,Lisbon,London
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
This command sets the local time zone relative to the Coordinated
Universal Time (UTC, formerly Greenwich Mean Time or GMT), based on
the earth’s prime meridian, zero degrees longitude. To display a time
corresponding to your local time, you must indicate the number of hours
and minutes your time zone is east (before) or west (after) of UTC.
E
XAMPLE
Console(config)#clock timezone-predefined GMT-0930-Taiohae
Console(config)#
R
ELATED
C
OMMANDS
show sntp (493)
calendar set
This command sets the system clock. It may be used if there is no time
server on your network, or if you have not configured the switch to receive
signals from a time server.
S
YNTAX
calendar set hour min sec { day month year | month day year }
hour - Hour in 24-hour format. (Range: 0 - 23)
min - Minute. (Range: 0 - 59)
sec - Second. (Range: 0 - 59)
day - Day of month. (Range: 1 - 31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2001 - 2100)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Note that when SNTP is enabled, the system clock cannot be manually
configured.